Yokogawa PM100

Name: Yokogawa PM100
Brand: Yokogawa
SKU: YO15667804YP
Price: 2988.00 USD
Availability: InStock

Reference YO15667804YP

Brand Yokogawa

External Pressure Sensor for CA700 Series, 16 MPa

$2,988

Quantity

Description

The Yokogawa PM100-E-05-P3 External Pressure Sensor, 16 MPa is a pressure module which uses the same Yokogawa dPharp technology as the CA700 and EJA/EJX series pressure transmitters. The unit plugs into the top of the CA700 and extends its pressure range 70MP (10150PSI), with range switching options to increase resolution at lower ranges. This unit is compatible with CA700's firmware versions 1.20 or later. With earlier firmware versions, a simple update is needed to be able to communicate with the unit.

Product Details

Reference YO15667804YP

1 - External Pressure Sensor, 16 Mpa, PM100-E-05-P3
1 - Waterproof Connection Cable (1 m)
1 - 1/2 in. NPT Male Thread to 1/8 in. NPT Female Thread
1 - 1/2 in. NPT Male Thread to 1/4 in. NPT Female Thread
1 - 1/2 in. NPT Male Thread to Rc 1/4 in. Female Thread

Product Features:

For calibration of pressure transmitters, accurate measurement of input and output values and calculation of error rate
Embedded calibration procedures enable users to perform certain calibration following prescribed procedure
By connecting to CA700 Unit, users can calibrate in high pressure range
Pressure type: Shield gauge
Measurement Range: 0 to 7 MPa sg/0 to 10 MPa sg/0 to 16 MPa sg
Measurement display range: to 8.4000 MPa/to 12.0000 MPa/to 19.2000 MPa
Measurement accuracy (6 months after calibration/test after zero calibration): ± (0.01% of reading + 2 kPa)/± (0.01% of reading + 3 kPa)/± (0.01% of reading + 5 kPa)
Measurement accuracy (1 year after calibration/test after zero calibration): ± (0.01% of reading + 2.8 kPa)/± (0.01% of reading + 3.8 kPa)/± (0.01% of reading + 5.8 kPa)
Allowable input: 2.7 kPa abs to 23 MPa sg
Temperature coefficient: ± (0.001% of reading + 0.16 kPa) / C degrees or less

6 other products in the same category: