Industrial Dual-Block Dry-Well Thermometer Calibrator (Black), -15 °C to 350 °C (Hot)
The Fluke Calibration 9009B156 Industrial Dual-Block Dry-Well Thermometer Calibrator (Black), -15 °C to 350 °C (Hot) may be used as a portable instrument or bench top temperature calibrator for calibrating thermocouple and RTD temperature probes. The 9009-B-156 is small enough to use in the field, and accurate enough to use in the lab. Calibrations may be done over a range of -15°C to 350°C (5°F to 622°F). Temperature display resolution of the 9009-B-156 is 0.1 degrees.
The temperature of 9009-B-156 is accurately controlled by a precision Hart Scientific controller. The controller uses a precision platinum RTD as a sensor and controls the hot temperature block with a solid state relay (triac) driven heater. A thermal electric device (TED) controls the cold temperature block.
The LED front panel continuously shows the current well temperature. The temperature may be easily set with the control buttons to any desired temperature within the specified range. The 9009-B-156's multiple fault protection devices insure user and instrument safety and protection.
Reference: BP08924736BP
Brand: BK Precision
Programmable AC Power Source, 300V/6A, 750 VA, 120VAC Line Input
Reference: BP60021893BP
Brand: BK Precision
Modular Programmable DC Electronic Load Mainframe w/RS232 & USB
Reference: FL22965074F1
Brand: Fluke
Three-Phase Energy Logger with Fluke Connect Compatibility (No Probes)
Reference: TE85551564TA
Brand: Tektronix
60 MHz, Dual Channel, 300 MS/s, Arbitrary/Function Generator with 3.9 inch Color TFT LCD Display
Industrial Dual-Block Dry-Well Thermometer Calibrator (Black), -15 °C to 350 °C (Hot)
