PIE 532  from PIE (Practical Instrument Electronics)
  • PIE 532  from PIE (Practical Instrument Electronics)

PIE 532

PP92398507P5

4-20 Milliamp and Voltage Loop Calibrator with Loop Diagnostics

$1,256
Quantity

Description

The Practical Instrument Electronics (PIE) PIECAL 532 4-20 mA/Voltage Loop Calibrator with Loop Diagnostics is the best tool for calibration, test, and diagnosing process loops. The PIE 532 brings all the features you would expect from a loop calibrator and times new Romanizing new ones. Make adjustments with the EZ-Dial knob or test limits with the Dual Action EZ-Check switch. Powerful ramping functions are only a button away on the PIE 532. Save potentially hours of troubleshooting time on problem loops with the PIECAL 532's unique Loop Diagnostic Mode.

In PIECAL's 532 Loop Diagnostic Mode, the loop current, voltage, impedance, AC voltage, and mode of operation are all displayed simultaneously eliminating the need of a DMM connection. Loop diagnostics is available in every mode of operation and truly is a diagnostic monitor, as parameters are continuously updated in real time. The smart diagnostic tool even indicates the most likely cause of loop failure! Loop Diagnostic features the ability to measure ground fault error caused by faulty wiring, flooded conduit and corrosion bridges.

Product Details
PP92398507P5
  • 1 - Set of Test Leads
  • 1 - Carrying Case (w/ Shoulder Strap)
  • 1 - NIST Traceable Calibration Certificate

Product Features:

  • True ±0.012% of reading accuracy
  • Source and read 0.000-24.000 mA
  • Simulate 2-wire transmitters
  • Power 2-wire transmitters and read 0.000-24.000mA
  • Display current in mA or -25.00-125.00 % of 4-20 mA
  • Read 0.00 to ± 30.00 VDC with 4X over range ability
  • Source 0.000 to 24.000 VDC with up to 20mA output
  • Direct calibration 1.000V to 5.000V
  • Auto step or ramp
  • Selectable step sizes, time in-between steps & soak time
  • Stop watch like EZ-Check™ switch
  • Full 5 digit display
  • Uses 1 9Volt alkaline battery
  • Superior battery life of 40 hours under typical continuous usage
  • Easy access to battery compartment
  • 240 VAC tolerant
  • HART protocol compatibility mode
  • Power on selectable 250? resistor in series with the output for compatibility with HART protocol enabled devices.
6 other products in the same category:

Reference: AM74893961AR

Brand: Amprobe

Amprobe RS-3 PRO

600VAC/300A AC Analog Clamp Meter with Resistance and Continuity, CAT IV Rated

Price $108
More
In stock

Reference: FL89393272F7

Brand: Fluke

Fluke 719

Electric Pressure Calibrator, -12 to 120 psi, .025% Accuracy

Price $3,161
More
In stock

Reference: FL44876867F4

Brand: Fluke

Fluke 481

Portable Radiation Survey and Detection Meter

Price $2,674
More
In stock

Reference: FL84450672F7

Brand: Fluke

Fluke 789

ProcessMeter with HART Communications/Diagnostics

Price $920
More
In stock

Reference: FL64228170F6

Brand: Fluke

Fluke 63

Infrared Thermometer, -25-999°F Range, 12:1 Ratio

Price $299
More
In stock

Reference: ME19561083MC

Brand: Megger

Megger CHM600

Power Cable Height Meter, 50 ft. Max.

Price $835
More
In stock