Amprobe AT-8030

Amprobe AT8030 is designed to keep electricians safe - CAT IV 600 V rated for the highest protection. Electricians are protected from the most dangerous level of transient overvoltage spikes up to 8,000 V that are known to occur in industrial environments. Save time, no blind searching - See hidden wires like never before with the AT-8000-R Receiver's patented Smart Sensor, which finds and displays the location and orientation of energized wires in walls, floors and ceilings on the large color TFT LCD screen. The Scan and Locate feature clearly identifies the single correct breaker or fuse, eliminating the confusion from multiple false positive readings common in older technology tracing tools. Embedded help screens make set-up easy and error free for novice users and experts alike.

Featuring three power modes "high", "low", and "loop" and two output frequencies (6 kHz and 33 kHz), the AT-8000-T Transmitter incorporates the best technologies available for optimal wire tracing and breaker identification on both energized and de-energized circuits. The AT-8000-T automatically sets the signal based on detected voltage and prompts the user to set the power level based on the application, delivering consistently accurate results.

Smart Sensor

Quickly and easily determine the precise direction and location of energized wires in walls, floors and ceilings with the patented Smart Sensor™. Combined with a fast signal processor that measures small changes in the detected signal multiple times per second with unmatched precision and ease of use for tracing energized wires.

Signal Clamp

When there’s no access to bare conductors, use the CT-400 signal clamp to induce a signal into either energized or de-energized circuits for wire tracing and load locating. The AT-8000-T Transmitter’s “loop” mode provides a boosted 6 kHz signal through the clamp to further improve accuracy and performance. Simply clamp around the desired wire to induce the signal, then begin tracing.

Tip Sensor

The shape of the Tip Sensor allows tracing in hard to reach areas, corners & tight spaces, as well as precise circuit breaker and fuse identification. By utilizing two different types of antennas (inductive coil and capacitive), the tip sensor enables optimal tracing results of both energized and de-energized circuits, which are automatically selected by operating mode.